Playstation 3 Error Codes
This is a list of Error codes for the Playstation 3 which is publically available. Many of these error codes have simple solutions while others require repair service or for them to be sent off to Sony service department. If your error codes are mainboard, blu ray, or power supply related XModdz should be your next phone call to get you back in action. We guarantee all our work and provide warranties for peace of mind.
PS3 Error Code 80010514
Have you encountered PS3 Error Code 80010514? This error could be caused due to issues regarding the hard drive of the console. You can try the options listed below to fix this error.
Option one – Preliminary checks
1. You can try removing the hard drive of the console and reinserting it. However, you should repeat this step around three to four times to see if the error goes away.
2. Make sure that console does not get heated up. PS3 is a very powerful device and therefore, there would be chances of overheating if it is kept in a place that is congested. You can turn of the console for around half an hour and let it cool down. Then try restarting it to see if the error still persists.
3. You should also ensure that all the audio and visual ports are connected properly.
Option two – Take PS3 for Repair
The second option before you is to take the console for repair. For this, you would have to go to an authorized service centre. However, getting it repaired may take some time and you would have to wait for the specified time. Therefore, if you are looking for an instant solution, this option may not be feasible for you. In addition, if your warranty period has expired, then you may have to pay the service charge.
PS3 Error Code 80710723
The PS3 error code 80710723 stands for either a network or a router error. At times, this error occurs when gamers try to perform some updates to their console.
Even after trying the update process numerous times, users get the same error message. However, there is no reason for you to get worried, as there are different steps that you can follow to get rid of the error.
Option 1 to fix PS3 Error Code 80710723
PS3 console is a very powerful system and generates a considerable amount of heat. If the console is kept in a congested spot, the chances of overheating increase. Therefore, the first step is to keep the console switched off for some time to give it time to cool down. Restart after a while and see if the error goes off.
Make sure that all your connections are in the proper place and the audio video ports are plugged in correctly. It is always recommended to check it once more and make sure that there is no case of loose contact.
It is also recommended that you take out the hard drive of the console and put it back once again. You can try this step three four times to see if the error goes away.
Option 2 to fix PS3 Error Code 80710723
The next obvious step in front of you is to take your Playstation3 to Sony to get it repaired. The repair process is long and it may take more than a week. Also, you may be required to shell out money for repair costs. Therefore, you should weigh your pros and cons before opting for this
PS3 Error 80010514
If you suddenly encountered Ps3 Error 80010514, one cause may be a defective part of the internal hard drive; a small piece of hard drive space that your PS3 is attempting to write on is not operating correctly. And the other cause is a faulty or incorrect installation of a software program or its firmware. The main symptoms of the Ps3 error 80010514 is its inability to read the disk and for the game to execute.
If you are experiencing this dreaded error on your console, here are a few simple tips that you can do to particularly reduce the chance of your PS3 breaking down:
1. Make sure that your internet connection is stable. If you are using a wireless connection, make sure your signal is at least a solid 80%. But of course, it’s better that the stability of the connection is higher than that. If 80% is not attainable, make the proper modifications until it is! This is to ensure that nothing stops your gameplay!
2. Clean your device on a regular basis. The Play Station 3 is a dust magnet. In the air ducts or ventilation ducts, you will see that dust has already been accumulated. The longer you use it without cleaning, the dirtier it is! To clean it, use a dry cloth to wipe over it twice a week, and the console should be fine. No need for alcohol or any type of cleaner that might worsen the problem! Cleaning your Ps3 will help avoid heat issues and circuit shortage that may happen.
3. If you’re installing any kind of firmware or software, make sure you follow the given instructions. Even if you have installed various versions prior, each one is different, and may need additional steps. Save yourself the headache and just follow them, it only takes a minute or so to do it right.
Having known that the PS3 error 80010514 is actually caused by an error with the Blu-Ray disk drive fitted inside your console gives you a better outlook on what the problem is and what should be done. Simple steps such as maintaining proper internet connection and making sure that your console is dust free will do the trick. Another way is to install recommended software and follow the manual well. Take good care of your gadget so that you won’t have to encounter future errors!
PS3 Error 8001050F
The Ps3 Error 8001050F is not really a newfound bug on the Ps3. If you experienced this error code, you’re not alone. This error came out on February of 2010, and all Ps3 owners all over the world, except for those who own the new slim model, suffered this so called ps3 error 8001050F.
The Ps3 error 8001050F is a bug that has everything to do with the digital clock on your Ps3. Sony found out that this error came about because the Ps3 consoles thought that February 2010 was a leap year, and since it wasn’t, It produced an error.
If you are experiencing:
Not being able to play games (even your own)
Trophies are missing
The time and date of your Ps3 has been re-set to January 1, 2000
Not being able to play downloads from the PlayStation store even before its expiration date
Then you must have the Ps3 error 8001050F bug. If you do, do not worry. This is not a major problem! You can fix this in just a few minutes!
You can choose between to ways.
1. Directly on your Ps3 Console.
On the XMB, or the Xross Media Bar, use the directional buttons to go to Settings.
Click on Date & Time Settings and press the X button to select it.
Then, change the date to any date AFTER February 28, 2010.
This setting should enable you to use your Ps3 as before. Remember to set the date
back to the real date after playing. It should work properly thereafter.
2. Through the Internet
Make sure you are connected to the internet via WLAN
Use the Browser Function on your Ps3 Game Console
Go to Settings.
Go to Date & Time Settings.
In Date & Time, navigate to Set via Internet
Again, change the date to any date AFTER Feb 28, 2010.
PS3 error 80710092
It is possible for anyone to keep getting the PS3 error 80710092 especially when watching a video or movie while streaming at the same time. This error code is quite common to most PlayStation 3 users that’s why there are many possible ways that you can use to get it fixed quickly.
Check your console if there are loose cables in it. If there is not any, then you can go ahead and turn your gaming console off for a few minutes and then turning it back on again.
Unplug all the cables that are already old and replace them with new ones, then make sure to plug all the cables in their proper input.
Also, try taking out the hard-drive from your console and then place it back after letting it rest for a few minutes.
The Truth behind Getting Your PlayStation Repaired at a Sony Service Center
Sony will definitely repair your gaming console that has any damage on it. Whatever the error that you have on your PlayStation 3, Sony will be able to help you with that. However, you cannot get the guarantee that they will be able to fix it for you. If you are still under warranty, Sony may give you a refurbished PS3 console instead of fixing the original one that you have. In that case, the memory that you saved on your console will be lost and you can never retrieve it back again unless if you decide to download it on your refurbished console. If you are no longer under warranty, Sony may charge you up to $150 with taxes and fees and you will have to wait for your gaming console for 6-8 weeks.
PS3 Error 80710102
PS3 Error 80710102 is a problem that is commonly encountered by gamers who use a PlayStation 3. This error really affects the settings of your console and it will not permit you to connect to the network hence; you will not be able to download any files, play games or even browse the Internet.
If you have this kind of error, you don’t have to worry anymore since it is now very easy to solve and by doing so, your PlayStation 3 will immediately run smoothly just like before it acquired the error.
What is the Possible Cause of this Error Code?
PS3 Error 80710102 is usually caused by incorrect settings in your PlayStation 3 selections. This happened if you already have out of date as well as outmoded software. Sometimes, this problem is also caused by a problem that is encountered at the end of your ISP. That is why it is imperative that you learn the basic steps by steps methods that you need in solving and troubleshooting the error. If you want to learn how to troubleshoot this problem all by yourself, you can read on. Keep in mind though that you will need the username and the password that you are using for the security of your network.
How Can You Easily and Quickly Fix PS3 Error 80710102?
1. Under the general option/setting are of your console, open the ‘Network Settings.’
2. The continually scroll down towards the ‘Internet Connection’ setting.
3. During the first yes/no prompt, select ‘Yes.’
4. Then make sure that you select ‘Custom.’
5. If in case you are using a wired connection, then you have to select ‘Auto-Detect.’
6. For wireless connection, enter the security type of your network followed by the network name and the password.
7. For the ‘IP Address’ setting, you have to select ‘Automatic.’
8. For the DHCP Host Name, select the option that says ‘Do Not Set.’
9. The DNS setting should be set to ‘Manual.’
10. For your Primary DNS, enter the following numbers – 22.214.171.124
11. Your Secondary DNS should be – 126.96.36.199
12. MTU should be placed on ‘Automatic.’
13. Proxy server should also be ‘Do Not Use.’
14. Have your uPnP ‘Enabled.’
15. To save the settings, press the X button twice.
PS3 Error Code 8001050f
Does anyone have the idea on what it means if you have PS3 error code 8001050f? Do you want to easily fix it yourself or do you want to have someone else fix the problem? This is one of the errors that PS3 owners get and most of them gets confused and panicked on what they have to do to fix it.
This article, you will be able to discover what this error code is all about, what are the causes of this error and why it happened, and it will also give us some tips and recommendations that will help you fix the issue.
The Error Code and Its Definition:
PS3 Error Code 8001050f is a kind of error that is caused by the clock that is in the internal part of your PlayStation hardware and this is the reason why you are signed out from the PlayStation network. This error code is actually also called the trophy registration error by Sony.
A certain bug has caused the internal clock of your PlayStation hardware that set the time to January 1, 2000.
When this error came about, the manufacturer of PlayStation which is Sony advised everyone who experienced this problem, except those who were using the PlayStation3 slim system, to avoid using the game console until the time when they figure out the fix for the problem.
As a gamer, there were people who happen to use your console before the time when the fix was released by the manufacturer. Due to this, there where cases wherein the trophy data and other game data were lost and no longer recovered by the user. Keep in mind that only the PlayStation 3 slim systems were not affected when this error came about.
What can you do to solve this problem yourself?
First step would be to save all of your game data on your thumbstick and delete all the game data that is currently on your PlayStation3 system.
Turn off your game console, and then turn the main power off as well. You are advised to do this for a few minutes, just to allow the power to dissipate perhaps. The main power is the one that is found at the back portion of your hardware.
After doing all of the steps above, try to restart your PS3 and copy all the game data back.
Learn from This Guide and Save Your Gaming Console from the PS3 Error Code 8001050f
Following the tips provided above is your initial step towards fixing your console. However, it is still better if you use this recommended guide so that you will be assured of a positive result.
Why don’t you check out this step by step guide? Visit: PS3 Error Code 8001050f Repair Guide
There are a lot of other ways that this guide will be able to provide so that you can completely eliminate the error code that is showing on your hardware. The steps provided here have been proven and tested so you don’t have to worry about losing everything that is stored in your console. All you are required to do is follow all the instructions provided by this guide and see for yourself how it works.
Do you want your PlayStation 3 fixed now? Visit: How to Fix PS3 Error Code 8001050f
PS3 Error 8071
April 9th, 2011 John
The PS3 Error 8071 is just one of the many messages that you may see flashed on your gaming console once a technical difficulty ensues. These messages may appear at any given time and they might indicate different problems which is why it helps to know how to solve one. Here are some of the things that can help you solve PS3 error 8071.
Find out What Causes the Problem
When it comes to console-related issues, the first thing that you need to do is find out what causes them. In this case, the PS3 Error 8071 is mostly caused by internet problems. However, some users have reported that other things, such as faulty or corrupted HDD may cause the problem as well. In any case, here are the things that you should do.
Contact your gaming console’s network servers
It is no coincidence that a lot of the players who suffer from this problem only experience it when they are playing popular games. This is because your connection problem may be caused by full servers. When this is the case, the best thing that you can do is confirm this problem and wait patiently.
Unplug the entire console for a couple of minutes
In order to eliminate the fact that this problem may be caused by a faulty HDD or console, you need to let it cool down for a couple of minutes. The best way to do this is to unplug your console, remove the cables and reattach them again after some time.
Check your internet connection
If you are using a router, it is best to check your other gadgets such as your laptop or your phone. You should check if they still have wireless internet connection. You can also check the other gadgets that are attached to your modem or router physically such as your desktop.
Use a Step by Step PS3 Repair Guide
With the use of a step by step PS3 repair guide, you can put an end to this problem no matter what happens. The best part is that you won’t have to be an internet connection expert in order to be able to do so.
This guide will teach you everything that you need to know about this issue, from the terms that you need to be aware of to the things that you have to remember in order to make sure that this problem does not arise ever again.
Why don’t you check out this guide right now? Visit: Step by Step PS3 Repair Guide
The one thing that you need to remember about these things is that most of them will just make you wait for a miracle to happen in the end. This is the reason why it is still best to use a step by step PS3 repair guide in order to solve this problem. By the time that you’re done using it your problem will surely be fixed.
Do you want to know how you can solve this issue the easy way? Right now? Visit: How To Fix PS3 Error 8071
PS3 Error Code 80710102
April 9th, 2011 John
The PS3 Error Code 80710102 has to be one of the most hated problems by players. This is because this message can pop up at any given time and most of the time; it appears when you’re in the middle of something important such as saving your game or playing with friends. This is why when solving the PS3 Error Code 80710102 you need to use the best solution in the market.
Why does the PS3 Error Code 80710102 happen?
This is usually the first question that comes into mind whenever this message is flashed. The answer is fairly simple though. It is caused by faulty internet connection. This is the reason why the things that you can do to manually solve this issue are concentrated on getting your connection back.
Contact your ISP – Sometimes, the problem does not have anything to do with your console or your router. Your ISP may be experiencing some technical difficulty due to other factors which causes the internet connect in your area to become fuzzy.
Unplug the wire cables – Check your cables even if you are not physically connected to your router. You should turn off your console, and detach all of the cables. You can also try cleaning the cables and the port. After a few minutes, you can plug them all back on.
Restart the router – There are times wherein you just need to reset your modem and your router. When this happens, you just need to turn off your router. After a few minutes, you can turn it back on.
80029945 - Can’t playback burn BDr movie (error message in the picture above)
710102 - DNS Error; No DSN server available.
8013030 - System Error due to failed update download
80010001 - Major Error , Game ability stopped
80010017 - Can't start Blueray Game
80010510 - Will not play hard drive games - Cause unknown
80010516 - An error occured during the start operation; Ps1 game swapped using the eject function and then play pressed quickly, ps1 game inserted again
8002314C- Network Registeration is down or PS3 has reached a Maxium number of PSN accounts.
80029023 - Exchanging Key Information exchange has timed out
80029024 - "Cannot Obtain an IP address".
80029564 - Downloaded Game will not install - Cause unknown
80030920 - An error occurred during the copy operation. The file may be corrupt or there isnt enough memory. Try copying data from original source.
80031150 - System Settings Fail to Save - Possible Blue Screen "Setting information is corrupted.Pre
80031601 - Error Creating Account
80130203 - PS3 connects to internet but not to network - Typically means that the required ports are
80410418 - DNS Error
80710016 - Playstation Network is down.
80710092 - "An error has occured. you've been signed out from the ps network" - (connection dropped?)
80710101 - Conneciton error
80710102 - IP conflict , PS3 Cannot connect to the router with current IP information - Try rebooting your router
80710541 - The connection to the server timed out. ss the x button to repair and restore default"
80710723 - Possible Port Error - Try opening ports , TCP port: 80, 443, 5223 and UDP port: 3478, 3479, 3658. or add Ps3 to DMZ
81019002 - Error copying saves from location A to location B not open to connect to store but PS3 can connect to internet.
8001050B - Will not play demo hard drive games, when blue-ray disc is inserted - Cause unknown
8001050D - An error occured during the start operation; Ps3 game swapped using the eject function and then play pressed quickly - ps3 game inserted again
80028EA5 - Unknown?? User cannot connect to PS3 network. Sony told the user to send the machine in.
80028ea6 - Connection error , Possible Proxy error power cord. Then shut off your modem/router, for about 5 mintues, then turn the modem back up first and let it sync, then turn the router back on(if using one) and let it sycn. Reconnect your power cable and flip the back swtich up again. Then make a new network connnection.
80028F10 - Go to Display Settings then HDMI (or whatever your connection is) and choose Automactic,
80028f17 - Ps2 disc Boot Error , An error occured during the start operation; Ps2 game swapped using the eject function and then play pressed quickly - Backup ps2 game inserted again (ps3rips)
80028F18 - Ps2 Disc Error, unsupported disc; eg. Utility discs, BB discs, IQ Remix game etc. ode).
80028F19 - PS2 Disc Error , fsck; the internal PS2 disk got corrupted and I guess that you can use HDD utility disc to fix it
80028F1A - Ps2 Disc Error , invalbnnetcfg; network config error
80029C68 - Corrupt data usually on external device
8002A10D - Unable to Add friend in XMB
8002A4A6 - Cannot load game to play online
8002A515 - Error Signing in
8002A548 - Unable to remain logged in - either to game or server
8002A705 - Unable to connect to server/host. Check router port configuration.
8002a71a - Possible NAT Error , Can log onto Game Server but can't join game and can't host game
8002b241 - DVI has no audio
8002F994 - To many people downloading the update just sit back until the morning around 5am - 11am and you should be able to get it.
8002F997 - Trying to Update the Firmware, copying to a file and installing from a USB drive falied".
8003051E - Game will not Save
8013013D - "A connection error has occurred" - May be to do with the SSID of the Router or signal strength if the conneciton drops Putting the PS3 into DMZ may help - otherwise check WPA key Ps3 can't handle WPA2 only WPA or none
8013013E - WEP Key error, change WEP key to all numbers (on router homepage) and try agian, or which to WPA. - Otherwise disable security
8013030F - Check Router Page, SSID Broadcasting possibly off.
8013030F - Access Point not detected
80410A0B - Internal PSP error, hardware fault. Send back to be replaced/fixed.
807101FF - An error occurred during communication with the server. This is a DNS errorThis is a DNS error
8071053D - Hard boot the PS3, turn off the PS3 to stand-by, flip off the back swtich and remove the
80710B23 - PS3 Network is Down or PS3 Network is too busy to respond
80710D23 - Turn the PS3 off for a bit (30 minutes give or take) with the power toggle (not standby XMB or touch button)
80029513 - Copyright Violation when attempting to install game
8002AD23 - ??? Found to be related to a connection issue Check to make sure firewall is off to see if that helps. (possibly network/update error)
80010514 - Disc error detected. Retrying operation.
80010036 - an error occured during the delete operation error.
80010014 - Has to do with downloading from the PSN, When you have bought a game and this error occurs, please go to your "recently downloaded/purchases" to download it first try.
8002F147 - Cannot update the firmware, Possible solutions, turn off proxys, try not using a firewall, and/or turn off UnuP support.
[ERROR CODE EXPLANATION]
710102- DNS Error; No DNS server available.
8013030- System Error due to failed update download
80010001- Major Error , Game ability stopped
80010014- Has to do with downloading from the PSN, When you have bought a game and this error occurs, please go to your "recently downloaded/purchases" to download it first try.
80010017- Can't start Blu-ray Game
80010036- An error occured during the delete operation error.
80010510- Will not play hard drive games - Cause unknown
80010514- Disc error detected. Retrying operation.
80010516- An error occured during the start operation; PS One game swapped using the eject function and then play pressed quickly, PS One game inserted again
8002314C- Network registration is down or maximum # of accounts has been created on the PS3.
80029023- Exchanging Key Information exchange has timed out
80029024- Cannot Obtain an IP address.
80029513- Copyright Violation when attempting to install game.
80029564- Downloaded Game will not install - Cause unknown
80029945- Can’t playback burn BD-R movie (error message in the picture above)
80030920- An error occurred during the copy operation. The file may be corrupt or there isnt enough memory. Try copying data from original source.
80031150- System Settings Fail to Save - Possible Blue Screen "Setting information is corrupted.Press the x button to repair and restore default"
80031601- Error Creating Account
80130203- PS3 connects to internet but not to network - Typically means that the required ports are not open to connect to store but PS3 can connect to internet. Try opening ports , TCP port: 80, 443, 5223 and UDP port: 3478, 3479, 3658. or add Ps3 to DMZ
80410418- DNS Error
80710016- Playstation Network is down.
80710092- "An error has occured. you've been signed out from the ps network" - (connection dropped?)
80710101- Connection error
80710102- PS3 Cannot connect to the router with current IP information - Try rebooting your router
80710541- The connection to the server timed out.
80710723- Possible Port Error - Try opening ports , TCP port: 80, 443, 5223 and UDP port: 3478, 3479, 3658. or add Ps3 to DMZ
81019002- Error copying saves from location A to location B not open to connect to store but PS3 can connect to internet.
8001050B- Will not play demo hard drive games, when blu-ray disc is inserted - Cause unknown
8001050D- An error occured during the start operation; PS3 game swapped using the eject function and then play pressed quickly - PS3 game inserted again
80028EA5- Unknown - User cannot connect to PS3 network. Sony told the user to send the machine in.
80028EA6- Connection error , Possible Proxy error power cord. Then shut off your modem/router, for about 5 mintues, then turn the modem back up first and let it sync, then turn the router back on(if using one) and let it sycn. Reconnect your power cable and flip the back swtich up again. Then make a new network connnection.
80028F10- Go to Display Settings then HDMI (or whatever your connection is) and choose Automactic, not Custom. I always had it on Custom before. Seems when you choose Automatic it allows the PS3 to select 50hz which is what you need for PAL games that don't support 60hz.
80028F17- PS2 disc Boot Error , An error occured during the start operation; PS2 game swapped using the eject function and then play pressed quickly - Backup ps2 game inserted again (ps3rips)
80028F18- PS2 Disc Error, unsupported disc; eg. Utility discs, BB discs, IQ Remix game etc. ode).
80028F19- PS2 Disc Error , fsck; the internal PS2 disk got corrupted and I guess that you can use HDD utility disc to fix it
80028F1A- PS2 Disc Error , invalbnnetcfg; network config error
80029C68- Corrupt data usually on external device
8002A10D- Unable to Add friend in XMB
8002A4A6- Cannot load game to play online
8002A515- Error Signing in
8002A548- Unable to remain logged in - either to game or server
8002A705- Unable to connect to server/host. Check router port configuration.
8002A71A- Possible NAT Error , Can log onto Game Server but can't join game and can't host game
8002AD23- Found to be related to a connection issue Check to make sure firewall is off to see if that helps. (possibly network/update error) .
8002AE21- Demo / File cannot be overwritten. Delete original file to install.
8002B241- DVI has no audio.
8002F147- Cannot update the firmware, Possible solutions, turn off proxys, try not using a firewall, and/or turn off UPnP support.
8002F994- To many people downloading the update just sit back until the morning around 5am - 11am and you should be able to get it.
8002F997- Trying to Update the Firmware, copying to a file and installing from a USB drive falied".
8003051E- Game will not Save
8013013D- "A connection error has occurred" - May be to do with the SSID of the Router or signal strength if the conneciton drops Putting the PS3 into DMZ may help - otherwise check WPA key PS3 can't handle WPA2 only WPA or none
8013013E- WEP Key error, change WEP key to all numbers (on router homepage) and try agian, or which to WPA.
8013030F- Check Router Page, SSID Broadcasting possibly off.
80410A0B- Internal PSP error, hardware fault. Send back to be replaced/fixed.
807101FF- An error occurred during communication with the server. This is a DNS errorThis is a DNS error
8071053D- Hard boot the PS3, turn off the PS3 to stand-by, flip off the back swtich and remove the power cord. Then shut off your modem/router, for about 5 mintues, then turn the modem back up first and let it sync, then turn the router back on(if using one) and let it sycn. Reconnect your power cable and flip the back swtich up again. Then make a new network connnection.
80710B23- PS3 Network is Down or PS3 Network is too busy to respond
80710D23- Turn the PS3 off for a bit (30 minutes give or take) with the power toggle (not standby mode)